Clamping System SG
Depending on the type of design the system SP only
allows radial expansion up to tolerance class IT 11. To bridge larger tolerances, system SG
is used.
This is a slitted clamping bush with a special
buttress thread. With this thread the bush is screwed onto the body. By applying an axial
force the clamping bush moves in direction of the force. Due to the thread angle there is
also a radial expansion. The workpiece is being clamped.
The axial component, which has an effect on the
workpiece, increases the transferable torque and the stiffness of the clamping process.
Consequently the workpiece is safely clamped even if it is machined with a large depth of
cut.
System SG Images
System SG - Flanged Chuck |
System SG - Flanged Chuck |
System SG - Flanged Chuck |
System SG - Flanged Mandrel |
System SG - Flanged Chuck |
System SG - Flanged Mandrel |
|
